|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
Operating Aids |
|||
|
|
||
| 1. | DO consult Operator's manual or Renfroe® when in doubt. Renfroe® factory representatives are available upon request at no charge to train and assist in establishing the proper use of Renfroe® products. |  |
|
|
|||
| 2. | DO lock clamp closed before lifting load. NEVER lift with Lock in open or "Lock Open" position. |  |
|
|
|||
| 3. | DO use safety hooks. NEVER use a hook that may release clamp. |  |
|
|
|||
| 4. | DO use an adequate number of clamps to balance load. NEVER lift loads that are not balanced. |  |
|
|
|||
| 5. | DO use clamps within their rated capacity. NEVER overload clamp. |  |
|
|
|||
| 6. | DO inspect clamp before each lift, follow inspection and maintenance instructions and use Renfroe® replacement parts to assure proper operation of the clamp. |  |
|
|
|||
| 7. | DON'T side load. NEVER lift from side with vertical clamp. |  |
|
|
|||
| 8. | DON'T lift over workers. NEVER lift over Safety Areas or personnel. |  |
|
|
|||
| 9. | DON'T misuse. NEVER lift plate from bottom of plate stack. |  |
|
|
|||
| 10. | DON'T rush. NEVER lift more than one plate at a time with a vertical clamp. |  |
|
|
|||
| 11. | DON'T improvise. Always use correct clamp for job. NEVER lift horizontally with a vertical clamp. |  |
|
|
|||
| 12. |
DON'T use clamp that has been overloaded. |
||
|
|||
| 13. | DON'T alter clamp. NEVER grind, weld or modify the clamp in any manner. | ||
|
Renfroe®
Operating Aids posters are available. |
|||